Sim Racing Gloves FAQ

For damp hands, a direct drive wheel, a leather or Alcantara rim, or sessions over an hour, yes. For short stints on a belt-driven wheel with a rubber rim and dry hands, they change little. More

There is no published evidence that they do. What they change is consistency: a predictable grip as your palms get damp, and less palm fatigue on a high-torque wheel.

Three reasons that hold up: grip stays the same as hands get damp, the rim does not absorb skin oil and salt, and the palms take less load on a strong wheel.

Direct from the makers in most cases. Of the twelve models tracked here, GCOM, F33L, Moradness, Syncmesh, Trak Racer, GT Omega and LVRY sell through their own stores; Syncmesh ships from Denmark to the EU and UK, and SRS sells through SimRaceShop. Each spec sheet links the source we read.

There is no published survey. Brand sponsorship decides much of what you see on streams, so it is a weak guide to which glove suits your hands.

You can, but they are built for padding and abrasion rather than feel. Work gloves weigh around 80 g per pair; the sim gloves in this database start at 31 g.

No. None of the models here carries fire certification or impact protection. These are grip and comfort products.

The GCOM SRG1 short at 31 g per pair (1.1 oz), followed by the FREEM SIM21 at 32 g and the VIRAGE PB1 at 38 g. Full table

Below roughly 40 g per pair, a glove stops registering as a layer between palm and rim. Three models are under that line.

A thick or padded glove does. A 31 g pair is about the weight of two sheets of paper per hand.

Seven of the twelve models in the database state none. Several describe their gloves as lightweight without giving a figure.

Blisters come from skin shearing against the rim, usually at the base of the fingers. A glove removes the direct skin-to-rim contact. A glove that is too loose makes it worse, because the fabric moves instead of your hand.

Wrap a soft tape around the widest part of your hand just below the knuckles, thumb excluded, and read the circumference in inches or centimetres. Some brands also want hand length from the wrist crease to the middle fingertip. Charts

Yes. Flat against the palm, no slack, no empty fingertips — but no pressure line across the knuckles.

It depends on the brand. GCOM says take the smaller size; Moradness says size up because its fabric stretches less.

FREEM, with eight sizes from 2XS to 3XL. F33L follows with seven, XXS to XXL.

They relax slightly with use and do not return to their original fit. Buy for a snug fit on day one.

On published specifications, the GCOM SRG1 short: 31 g per pair, fully external double seams, a strap-free cuff and printed silicone grip on an AX leather palm, at €69. Comparison

The GT Omega PRESA at £24.95, though it was sold out in all sizes on 7 October 2026. Trak Racer follows at €35.

Short keeps clear of a formula-style rim and weighs less; long covers the wrist and suits GT rims and cold rooms. More

Alpinestars covers the thumb, index finger and middle finger. Moradness, Sparco, FREEM, Trak Racer and SRS cover the index finger and thumb. Syncmesh and LVRY cover the index finger.

Syncmesh is the only brand publishing a torque rating: up to 16 Nm at 8–15 hours per week. F33L states its glove suits all force feedback levels.

Not reliably. The LVRY SIM GLOVE at US$150 publishes less technical detail than the SRG1 at €69 or the Trak Racer at €35.

All of them — glove choice does not depend on the wheelbase brand. What matters is torque: Syncmesh rates its Grip M2X to 16 Nm, which covers Fanatec, Simucube and Moza bases in common use.

No single one. A thin synthetic leather with printed grip gives the most feel, mesh the most airflow, a rubber-coated microfibre the most grip when damp. Alcantara is a rim material, not a glove material. More

On published construction, the Moradness Aura Pro for its perforated mesh palm, or the SRG1 for the least material overall. More

A thick, closed glove can. A thin, ventilated one usually improves things, because the fabric absorbs moisture that would otherwise sit between skin and rim.

Follow the care instructions for your model. GCOM permits lukewarm hand washing with mild detergent or a gentle machine cycle up to 30 °C without spinning; air dry and avoid tumble drying and bleach. Moradness permits a cold delicate machine cycle; Syncmesh forbids machine washing. If care information is missing, check the label or ask the manufacturer before washing. More

No manufacturer publishes a frequency. Wash when the palm starts feeling slick rather than on a schedule.

No manufacturer publishes a service life. Syncmesh is the only brand to state an expected workload — 8 to 15 hours of racing per week. Grip surfaces wear and printed silicone lifts if the palm is scrubbed.

No. It coats the fibres and reduces grip.

They keep skin oil and salt off it, which is what darkens and polishes a leather or Alcantara surface over time.

Manufacturer product pages first; retailer listings and third-party tests are labelled as such. Every value carries the date it was read. Method

The manufacturer does not publish that value. It is not an estimate.

The comparisons sort by published properties and group by use case, so you can see which property drove a result.

External seams, reverse stitching, Nanofront®, Nm and the rest are defined in the glossary.